Positioning: It is not a finished separator for direct use. It serves as a coating base for composite separators, specially supporting ceramic coating, PVDF coating and LCP electrospinning for separator manufacturers. Suitable for power batteries, energy storage batteries and semi-solid batteries. It addresses the pain points of conventional dry-process / wet-process separators, including severe thermal shrinkage at high temperatures and poor electrolyte uptake.
![]()
✅ Core Specifications
Material: 100% virgin PP meltblown nonwoven fabric
Thickness: 10–20 μm (thin & lightweight) / 30–40 μm
Basis weight: 30–60 g/m²
Pore size: Adjustable at submicron level; final pore size reaches 150–200 nm after LCP electrospinning coating
Porosity: 40%–70%; 62%–68% after coating
Electrolyte uptake: 292.53% (2.2 times that of dry-process separators, 2.3 times that of wet-process separators). The electrolyte retention rate can reach up to 343% after coating.
Heat resistance: Nearly no thermal shrinkage at 150°C, greatly lowering the risk of short circuit caused by thermal runaway.
✅ Four Core Advantages (Key selling points for foreign promotion)
Outstanding thermal stability: Traditional polyolefin separators tend to shrink under high temperature, which is a major trigger of thermal runaway. The 3D fiber network of meltblown material maintains dimensional stability at 150°C and raises the safety baseline of batteries.
Ultra-high electrolyte absorption & retention: It has good affinity with electrolyte and abundant ion transport channels, improving rate performance and extending cycle life. Ideal for long-cycle energy storage batteries.
Compatible with multiple coating processes: The uniform 3D fiber network acts as an ideal carrier for LCP electrospinning, ceramic and PVDF coatings. It ensures good coating adhesion and higher mechanical strength of finished separators.
Customizable thin design: It can be thinned while maintaining puncture resistance, minimizing the adverse impact of separators on battery energy density.
✅ Application Scenarios
Power batteries: Composite separator substrate for high-safety requirements
Energy storage batteries: For applications requiring long cycle life and high electrolyte retention
Semi-solid batteries: Supporting substrate for new coating systems such as LATP and LCP
Positioning: It is not a finished separator for direct use. It serves as a coating base for composite separators, specially supporting ceramic coating, PVDF coating and LCP electrospinning for separator manufacturers. Suitable for power batteries, energy storage batteries and semi-solid batteries. It addresses the pain points of conventional dry-process / wet-process separators, including severe thermal shrinkage at high temperatures and poor electrolyte uptake.
![]()
✅ Core Specifications
Material: 100% virgin PP meltblown nonwoven fabric
Thickness: 10–20 μm (thin & lightweight) / 30–40 μm
Basis weight: 30–60 g/m²
Pore size: Adjustable at submicron level; final pore size reaches 150–200 nm after LCP electrospinning coating
Porosity: 40%–70%; 62%–68% after coating
Electrolyte uptake: 292.53% (2.2 times that of dry-process separators, 2.3 times that of wet-process separators). The electrolyte retention rate can reach up to 343% after coating.
Heat resistance: Nearly no thermal shrinkage at 150°C, greatly lowering the risk of short circuit caused by thermal runaway.
✅ Four Core Advantages (Key selling points for foreign promotion)
Outstanding thermal stability: Traditional polyolefin separators tend to shrink under high temperature, which is a major trigger of thermal runaway. The 3D fiber network of meltblown material maintains dimensional stability at 150°C and raises the safety baseline of batteries.
Ultra-high electrolyte absorption & retention: It has good affinity with electrolyte and abundant ion transport channels, improving rate performance and extending cycle life. Ideal for long-cycle energy storage batteries.
Compatible with multiple coating processes: The uniform 3D fiber network acts as an ideal carrier for LCP electrospinning, ceramic and PVDF coatings. It ensures good coating adhesion and higher mechanical strength of finished separators.
Customizable thin design: It can be thinned while maintaining puncture resistance, minimizing the adverse impact of separators on battery energy density.
✅ Application Scenarios
Power batteries: Composite separator substrate for high-safety requirements
Energy storage batteries: For applications requiring long cycle life and high electrolyte retention
Semi-solid batteries: Supporting substrate for new coating systems such as LATP and LCP